Assembly

1.  Place ten inch top ring (A) on a flat surface, screws facing up. Next, screw the24 inch upper legs (B) onto the ring.

2.  Now place the six inch ring (C) over the screws.

3.  Screw the lower legs (D or G) onto the threads above the ring. Note: the 48 inch uses 24 inch lower legs (D) and the 36 inch Toppitt!TM uses 12 inch lower legs (G).

4.  Use the alignment tool (E) to align the lower legs (D) (of the 48 inch Toppitt!^TM only) by placing it between the lower legs (D) as illustrated. Now guide the Toppitt!^TM legs through the potted plants in the container to a depth of approximately 8 inches. Remove the alignment tool (E) and finish pushing the Toppitt!^TM down into the soil until it seats at the bottom of the container.

5.  Place the alignment tool (E) on the 5 inch ring to make a tray for accessory items.

6.  To make a trellis, invert the 48 inch Toppitt!^TM with legs extending upwards and gather the legs together. Place the coning tool (F) on the legs to hold the legs in place.

View Full Step-By-Step

Click on the thumbnail to the left to view full step-by-step. For questions or comments about your Toppitt!^TM, visit our contact page to submit an email, or give us a call at 903-220-9595.

Parts List 36 Inch Toppitt!^TM
A. 10 inch top ring (qty. 1)
B. 24 inch upper legs (qty. 3)
C. 6 inch lower ring (qty. 1)
D. 12 inch lower legs (36 inch Toppitt!^TM only - qty. 3)

Parts List 48 Inch Toppitt!^TM
A. 10 inch top ring (qty. 1)
B. 24 inch upper legs (qty. 3)
C. 6 inch lower ring (qty. 1)
D. 24 inch lower legs (qty. 3)
E. Alignment tool (48 inch Toppitt!^TM only - qty. 1)
F. Coning tool (48 inch Toppitt!^TM only - qty. 1)